Badminton court Light Induction high bay light 200W

Induction High Bay Light Waterproof Testing

Induction lighting-Frequently Asked Questions

Why Choose Induction Lights?

There are four main benefits of using induction lights: 

1. Maintenance
   With over 100,000 hours of life, induction lamps are highly reliable and practically maintenance free. In most cases, this saving alone will more than offset the initial cost of the induction system
2. Efficiency
   Producing 150 pupil lumens of light for each watt of energy, induction lamps offer energy savings of 50%, compared to conventional sodium/metal halide
3. Brightness
   Offering crisp white light with a CRI index of 80+ and a choice of 2700K, 3500K, 5000K and 6500K colour temperatures, this makes colours appear brighter and more vibrant
4. Instant
   Induction lamps respond instantly to being switched on or off, with no lengthy waiting times.

What is the induction light system and how does induction lighting work?

The induction lamp uses revolutionary light technology that combines the basic principles of induction and gas discharge. Induction technology avoids the use of electrodes, which allows for an unprecedented 100,000 hours of high quality white light.

Do induction lights need a dedicated fixture?

Induction lights and ballasts can be fitted into existing fixtures and housings. Please ensure that the existing reflectors are in good order otherwise we cannot guarantee lumen output.

What are the components of the system?

The system comprises of three components: the ballast, the magnetic rings and the lamp tube.

The magnetic rings transfer energy from the high frequency ballast to the discharge gas inside the glass tube, using an antenna that contains the primary induction coil and its ferrite core. 

The rings also have a heat–conducting rod with a mounting flange which allows the induction lamp system to be mechanically attached to the luminaries.

Can induction interfere with computers, telecommunications or other electronic Device?

No. Induction systems run at 140 kHz which complies with FCC and CE (EMC) Regulations with non–interference under normal circumstances.

Induction Lamp vs LED light

1. Nikola Tesla invented induction lighting in 1891. It is a proven, refined lighting technology, established as highly energy efficient.  (Nikola Tesla also invented AC current).
   LED is still under much technical revision and unproven in high power lighting applications.
2. Induction lighting is a cost effective solution as a new purchase or as a retrofit, with a 1 to 2 year ROI when considering energy and maintenance costs (without energy rebates or tax incentives).
   LED is energy efficient..... but with a 4 to 5 year ROI (currently costs nearly twice as much as Ind.).
3. Induction Lighting is designed for area lighting and does not need to be specially designed for that purpose.
   LED is designed for directed/spot lighting. LED has to be "domed", needing many LEDs to create the effect of area lighting. This factor is expensive and more vulnerable to premature technical failures.
4. Induction Lighting has a rated life of 80,000 - 100,000 hours.
   LED has a rated life of 30,000 – 50,000 hours.
5. Induction is warranted for 5 years.
   LED has a shorter warranty of 1 to 3 years.
6. Induction lighting can maintain output from – 50C to + 100C degrees.
   LED has a seriously reduced output (lumen depreciation) above 25C degrees. Most lights are that hot in an enclosed fixture with just spring/summer ambient temperature. (See the CREE article on temperature).
7. An induction, 200 watt bulb is rated at 33,320 "visible" lumens.
   A LED, 200 watt bulb is rated at 17,520 "visible" lumens, a 15,800 Visible Lumens difference.

The features of a good lamp

1.   Energy Saving of 50%-90%

As the electrodeless induction lamp generates light via electromagnetic induction with the help of electronic ballast and microchip IC control, they offer beneficial features such as high luminous efficacy and high power factor, ect.

2.   Extreme long life

Electrodeless induction lamps have a useful working life of up to 100,000 hours because they do not have electrodes of filaments that easily burn out or get damaged. The long life of induction lamps is 100 times than that of an ordinary tungsten filament lamp.

3.   Instant-Start capability

Unlike other HID lighting technologies, induction lamps can have the instant-start and hot-start capabilities; they can be turned on within milliseconds.

4.   Glare and flicker-free lighting

The human eye will be able to see light flicker when the working frequency is below 40KHz. Induction lamps have a working frequency of 210KHz so on visible flicker will be detected, and thereby not cause any strains to the eyes.

5.   Superior lights

Light generated by induction lamps is similar to fluorescent light with a broad color spectrum.

6.   Good color reproduction

As well as providing a bright environment, a good lighting system should also provide a vibrant and vivid-looking environment. Induction lamp’s high color rendering index (CRI>80Ra) will allow users to see the true object in its full glory.

7.   Minimal electromagnetic interference

Low-frequency induction lamps operate at a low frequency of 300KHz, and are fitted with specially designed metallic structural shielding and anti-interference electronic circuitry. Hence their EMC and EMI characteristics all comply to recognized international standards.

8.   Low operating costs

Induction lamps generate little heat in comparison to other lighting technologies, so it will not raise the room temperature much and thereby lowering the air-conditioning workload and its associated costs.

Induction lamp has extremely long life that will greatly lower the overall cost of maintenance (including replacement material and labor costs).

Induction lamp’s high luminous efficacy means that less electricity is required to generate the same light levels when compared to other lighting technologies, and thereby reducing the electricity running cost.

9.   Environmentally friendly

Induction lamps are made with amalgam so it can be recycled. In contrast, traditional lighting technologies use liquid mercury as one of its raw materials, which is difficult to recycle and can easily pollute the environment. Also the longevity of induction lamps will result in less solid waste in comparison to other lighting technologies.

The professional manufacturer of induction lamp

Do you know who the best manufacturer of induction lamp in Guangdong is? If you do not visit a factory, you must be unknown. With the improvement of public concept in environment-friendly, the consumer demands more induction lamps so that the enterprises are facing increasingly tough situation. A few manufacturers can focus on induction lamp over 5 years, but Xingpu Energy-Saving Light Co., Ltd. It has the history of 6 years on the induction lamp. Through the challenge in the high competition and difficulty, XPES makes lot of achievements, such as solving the problem of yellow and black lamp.

There is the productive process of XPES induction lamp as follow：

One word of consumer is louder than a hundred of salesman. XPES has achieved less than 1% maintenance rate, reducing the numerous trouble and repair expense. That is why XPES have been trusted and supported by consumers.

Welcome to contact us.

Share from Guangdong Xingpu Energy-Saving Light Co., Ltd.

Energy-Saving Hotline: 008613509950656

Website: http://www.chinaxpes.com/

Working Principle of Induction Lamps

An induction lamp is essentially a fluorescent lamp without the principles of electrodes results in a lamp unmatched life: lasting 100000 hours or 25 years. So light can be generated via a gas discharge though simple magnetism. Free electrons are accelerated within the electromagnetic field and are further excited as they collide with mercury atoms. These excited electrons then emit ultraviolet radiation as they fall back from this high-energy state to a lower stable level. The ultraviolet radiation is finally converted to visible light as it passes through the phosphor coating on the surface of the tube.

Free electrons are accelerated within the electromagnetic field and are further excited as they collide with mercury atoms. These excited electrons then emit ultraviolet radiation as they fall back from this high-energy state to a lower stable level. The ultraviolet radiation is finally converted to visible light as it passes through the phosphor coating on the surface of the tube.

Our latest generation of induction lamps has taken full advantage of technological developments, and the benefits they offer make them the clear-cut choice for many lighting applications over traditional light sources.

Induction lamps are made with amalgam so it can be recycled. In contrast, traditional lighting technologies use liquid mercury as one of its raw materials, which is difficult to recycle and can pollute the environment. Also the longevity of induction lamps will result in less solid waste in comparison to other lighting technologies.

Read More: XPES induction lighting

How to Buy Excellent Induction Lamps?

With the development of science and technology, the lamp sellers are so increased that the lamp buyers is confused to how to buy excellent induction lamps? All in all, if you want to buy excellent induction lamps, you must connect XPES (Guangdong Xingpu Energy-Saving Light Co., Ltd).

Features of XPES Lighting

Long Lifespan: The common filament lamp, daylight lamps, energy-saving lamps and other gas-discharge lamps have the wire of electrodes. Therefore, the sputtering effect of the wire or electrode is in an inevitable component of limiting the life of lamp. Without electrodes, the low-frequency induction lamps work on the electromagnetic principle and the fluorescence discharge principle. Thus, there is no inevitable component of limiting the life of lamps. Normally, these lamps are available for 50,000-100,000 hours.

Energy-Saving: compared with filament lamps, induction lamps can save more than 80% energy, and a luminous flux of a 85W high-frequency induction lamp is almost same with that of 450W filament lamp.

Environment-Friendly: Owe to the solid amalgam in the induction lamp, it will not cause any pollution to the environment even they became decomposed. The rate of recycle can be up to 99%. As a result, it is extraordinary environment- friendly lighting source which can reduce the gas emission.

High Efficiency: Over 80% LM/W on average.

No Flash: As they work on low frequency, it is considered to be completely no flash effect, so it will not make your eyes feel exhausted in order to protect your eye.

Good Color Rendering: The color rendering index is higher than 80, providing gentle light and showing the natural gloss of the objects.

Color Temperatures Selectable: Customers can select the color temperature ranging from 2700K to 6400K, and the color bulb can be made to use foe garden decoration.

Low Luminous Decay: the luminous flux for 60,000 hours can be at least 70%.

No need to warm up: The lamp can be switched on and restarted at once, and will not cause the wire sputtering effect normally caused by the common electrode discharge lamps.

Sound Electrical Performance: This kind of lamp works on IC chips and wide-voltage design. Providing high power factor, low current is harmonic and adjustable light.

Share from Guangdong Xingpu Energy-saving Light Co., Ltd.

How does induction lighting work?

Generally, Induction lamp does no work by using electrodes to create illumination. They are rely on the basic principle to emit the light. They work by electromagnetic induction to form 

the plasma gas discharge. Here's how it works: rings with magnetic coils create an electromagnetic field. The high frequency electromagnetic field create by an electronic ballast. This 

field was rounded a glass tube and the discharge path to form a closed loop induced by the coils, keeping free electrons collide with mercury atoms and excite the electrons. As the 

electrons reach a level with lower, more stable. They release energy in a form of invisible 

UV light. The UV light strikes the phosphorous lining in the tube, creating a reaction that 

changes the UV light to a harmless, white visible light. That is some information about what 

is induction lamp technology.

Share from Guangdong Xingpu Energy-saving Co., Ltd..

What is induction lamp technology?

Essentially, induction lamps is a fluorescent light without electrodes or filaments which resultthe bulbs to burn out quickly. Therefore, induction lamps have long lifespan of up to 100,000hours. That means, an induction lamp can work 27 years if they operated 10 hours in one day.

Induction lamps has many superior features, including the following:
• Maintenance-free operation
• High lumen, can reach up 80lm/w
• Long lifespan, can reach up 100,000 hours.
• Good color rendering index (CRI)—80+ and in some cases 90+
• Choice of warm white to cool white (2,700–6,500 K) color temperature
• Instant start and restrike operation
• No flickering, glare, or noise
• Low-temperature operation
• Excellent heat dissipation
• Dimmable capability in some case.
• High power factor: 0.99.
• Operating temperature: -25+50
Applications with High Potential for Induction Lighting
• Suitable for some locations which is hard to install and high maintenance costs, such as street lighting and tunnels, factory.
• Suitable for the working environment with high temperature and low temperature.
• Suitable for some place need high-quality lighting or highly desirable lighting
• Suitable for high install height, not easy to install.

By XPES induction light

Attn: Vivian

Energy Saving hotline：0086 13509950656

Professional Engineer :Skype xpwjd-9

Website：www.chinaxpes.com

What is induction lamp? What is the advantages of induction lamp?

1.     What is the induction lamp system and how does induction lamp work?

The induction lamp system uses a revolutionary technology of light generation that combines the basic principles of induction and gas discharge. This new technology delivers an unprecedented 60,000-100,000 hours of high efficiency lighting effects.

2.     What is the application about XPES induction lamp?

Because the XPES induction lamp has no electrodes, filament, and therefore it does not restrict the life of components, so XPES promise the induction lamps have long life, energy saving effect is remarkable, safety, environmental protection non-glare, etc. Therefore it is ideal for factory buildings, workshops storage (more comfortable working to ensure that workers), indoor badminton courts, table tennis, other sports venues (guaranteed balls, eye, light three-point line when not produce glare), power plants, refuse stations, highways, urban roads, auditorium hall, meeting rooms, shopping malls, tunnels, station waiting rooms, classrooms, library, greenhouse vegetables, plant shelf, especially for high-risk places and where it is difficult and expensive to maintain and re-lamping.

3.     What is the advantages of XPES induction lamp?

1.Ra≥80, close to natural light, high color rendering index, no flicker, no glare;

2. Long lifespan, five year warranty;

3. Anti-corrosion, XPES induction lamps can be used in large quantities at acid-base properties, such as: power plants, refuse stations

4. No radiation, energy saving, good heat dissipation;

5. Instant start.

By XPES induction light

Attn: Vivian

Energy Saving hotline：0086 13509950656

Professional Engineer :Skype xpwjd-9

Website：www.chinaxpes.com

How to test the quality of induction lamp manufacturers

There is a common saying in China that practice is the sole criterion for testing truth. No right to speak if someone has not used induction lamps for 5 years. I believe many people would like to buy products after a personally experience about the quality of products. With different daily necessities for the "light", want to see the quality of the product would have to test in many ways.

So how to test it?

1.             The production process. Quality of raw materials and production technology products do not pass, even if labeled well-known trademarks, as is the lack of public recognition. ①XPES induction lamp. A real self-production and 5-year warranty of professional induction lamp manufacturers in industry. We promise forever a month warranty more than the competition, refused assembly and assembled. ②Products have been approved of many certifications, and many products have been patented. What the patent products mean? Means independent, professional, technical, quality assurance, and recognition. Choose us, choose professional manufacturer. Energy-saving Hotline: 008613509950656

2.             The quality assurance. Many customers have been "5-year warranty," the guarantee from the manufacturer. But the customer does not take into account whether the company really have actual cases have proved they can really 5-year warranty. XPES was founded in 2009, the first batch of old customers belong to XPES are Heyuan Stadium, Toyota Motor Corporation, the road projects of Foshan Gaoming. XPES induction lamp have been after six years of testing, the lamp has been normal use. This is the commitment made by XPES! To select XPES is the choice of trust.

3.             Our after-sales team will regularly follow up with a call or come to visit customers, while with the promise of the warranty, giving you a more intimate and more professional care! Within five years we solemnly promise if there is any quality problem, you get a free replacement from us.

By XPES induction light

Energy Saving hotline：0086 13509950656

Professional Engineer :Skype xpwjd-9

Website：www.chinaxpes.com

How to choose a professional induction lamp manufacturer?

Many people always shop around to choose the best before buying. It is the same way to choose a     induction lamp manufacturer. How to shopping around. You should pay attention to the following:

1. Quality. A manufacturer who owning a professional production technology of induction lamp bulb is comparability and focusing on production of induction lamp can be called "professional production".

2. Service. Complete and thoughtful sales service is to ensure the interests of buyers, as they solve a lot of unnecessary after-sale issues.

3. Price. Many people are always a good bargain hunter when choosing a product. But a cheap product is really a good product? If you have a good insight, I believe you will choose cost-effective products, rather than cheap products.

Faced with so many induction lamp manufacturer in the market, we have to choose the real induction lamp manufacturer. (with ballasts, lamp tubes, special induction lamp fixtures)

By XPES induction light

Energy Saving hotline：0086 13509950656

Professional Engineer :Skype xpwjd-9

Website：www.chinaxpes.com